Changing the sound and beep tone, Turning on the clock display, Boosting the bass sound — d.bass – Sony CDX-3180 User Manual

Page 11: Attenuating the beep tone, Power select function

Advertising
background image

11

EN

Digital D-BASS

Analog D-BASS

Level

Level

0dB

D-BASS 3

D-BASS 2

D-BASS 1

0dB

D-BASS 3

D-BASS 2

D-BASS 1

Frequency (Hz)

Frequency (Hz)

Other Functions

Changing the sound and
beep tone

Boosting the bass sound — D.bass

You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
signal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-BASS dial. This effect is similar to
the one you get when you use an optional
subwoofer system.
Moreover, the Digital D-bass* function creates
even sharper and more powerful bass sound
than Analog D-bass.

*

Digital D-bass is available during CD playback.

Adjusting the bass curve

Turn the D-BASS dial to adjust the bass
level (1, 2 or 3).
“D-BASS” appears in the display.
During CD playback, “DIGITAL D-BASS”
appears in the display.

To cancel, turn the dial to the OFF position.

Note
If the bass sound becomes distorted, adjust the D-
bass dial or volume control.

Attenuating the beep tone

Press (6) while pressing (SOUND).

To obtain the beep tone again, press these
buttons again.

Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep tone will
be disabled.

Turning on the clock
display

— Power Select Function

Only for cars with an accessory position on the
ignition key switch

To turn the Power Select Function ON

Press (OFF) while pressing (SOUND).
The Power select Function ties the clock
display power to the accessory position on
the ignition key switch.
To avoid battery wear, the clock is not
displayed while the unit is initializing.

Advertising