Sim2 Multimedia DIGITAL D60 - Manual (Page 34)

34 Using the projector
Turning the power off
To turn the projector off, press POWER ( ) on the remote
control and a warning message appears. Press POWER
again.
•
The Power indicator light flashes orange and the fans run
for about 90 seconds to cool the lamp. The projector will
not respond to any commands until the cooling process
is complete.
• Then, the Power indicator light is a steady orange once
the cooling process has finished and fans stop.
• If the projector will not be used for an extended period,
turn the main power switch off and unplug the power
cable from the power outlet.
• To protect the lamp, the projector will not respond to
any commands during the cooling process.
Press again to power off.
Are You Sure to Power Off?
Press any other button to cancel