Sony WAHT-SA1 User Manual

Page 2

Advertising
background image

2

US

3

To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.

Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.

To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on the
apparatus.

In door use only.

For the customers in the U.S.A

For wireless transceiver (EZW-
RT10) and wireless transmitter
(EZW-T100)

This transmitter must not be co-located or operated
in conjunction with any other antenna or
transmitter.
This equipment complies with FCC radiation
exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to
OET65. This equipment should be installed and
operated with at least 20 cm and more between the
radiator and person’s body (excluding extremities:
hands, wrists, feet and ankles).

This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric
shock to persons.

This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing)
instructions in the literature

accompanying the appliance.

Owner’s Record

The model and serial numbers are located on the
side exterior of the unit. Record the serial number
in the space provided below. Refer to them
whenever you call upon your Sony dealer
regarding this product.
Model No. WAHT-SA1
Serial No.______________

Date of Manufacture Marking, Shock Hazard
Marking and Associated Graphical Symbols are
located on the bottom exterior.

The following FCC statement applies only to the
version of this model manufactured for sale in the
USA. Other versions may not comply with FCC
technical regulations.

WARNING

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television

Table of Contents

About This Operating Instructions ..... 4

Overview ............................................ 4

Unpacking .......................................... 5

Hooking Up ........................................ 6

Connecting the AC Power Cords
(Mains Leads) .................................... 8

Setting up the Wireless System .......... 8

Troubleshooting ............................... 12

Specifications ................................... 13

Index to Parts ................................... 15

WARNING

Advertising