Sony WAHT-SA1 - Manual (Page 6)

6 US
Connect the surround amplifier to your
S-AIR main unit.
Before installing, make sure to
remove the AC power cords
(mains lead) of all S-AIR
products from wall outlets
(mains).
Inserting wireless
adapters
1
Insert the wireless transceiver
(supplied) in the slot on the rear
of the surround amplifier.
Note
• Insert the wireless transceiver (supplied)
with the S-AIR logo facing up. Also,
make sure the V marks on the wireless
transceiver (supplied) and the slot on the
surround amplifier are aligned when
inserting.
• Do not touch the terminals of the
wireless adapters.
2
Insert the wireless transmitter
(supplied) in the slot on the
S-AIR main unit.
For details, refer to the operating
instructions of the S-AIR main unit.
The illustration of the rear panel of an
S-AIR main unit is an example. Not all
S-AIR main units look exactly the
same.
Note
• Insert the wireless transmitter (supplied)
with the S-AIR logo facing up. Also,
make sure the V marks on the wireless
transmitter (supplied) and the slot on the
S-AIR main unit are aligned when
inserting.
• Do not touch the terminals of the
wireless adapters.
• If wireless adapter(s) come with your
S-AIR main unit, you do not have to use
the wireless transmitter included in this
wireless surround kit for your S-AIR
main unit. If you do not intend to use the
wireless transmitter (supplied) for an
extended period of time, do not place it
in locations that are hot and subject to
direct sunlight.
Hooking Up
R SURROUND SELECTOR
S-AIR ID
EZW-RT 10
SPEAKER
SURROUND
PAIRING
C
B
A
SURROUND BACK
L
EZW-R
T10
CENTER SUBWOOFER DIGITAL IN
COAXIAL OPTICAL
FRONT R FRONT L SUR R SUR L
SPEAKER
TV/VIDEO HDMI OUT
SPEAKER EURO AV
OUTPUT(TO TV)
COAXIAL 75 AM FM
ANTENNA
DMPORT
EZW-T100
EZW -T1 00
Rear panel