Power management state (pm_state), Ate, the, Power management state – SMSC LAN9420 User Manual
Page 154: Pm_state), Fiel, Ate in the, Power, Management state (pm_state), Field, Datasheet
Advertising
Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface
Datasheet
Revision 1.22 (09-25-08)
154
SMSC LAN9420/LAN9420i
DATASHEET
Note 4.11
The default state of this field is dependant on the setting of the VAUXDET signal as noted
in the description.
1:0
Power Management State (PM_STATE)
This field sets the current PM state.
00b = D0
01b = RESERVED
10b = RESERVED
11b = D3
Operations that attempt to write a RESERVED setting to this field will
complete normally on the PCI bus; however D[1:0] are ignored and no state
change occurs.
R/W
00b
BITS
DESCRIPTION
TYPE
DEFAULT
Advertising
This manual is related to the following products: