Connecting to a power source, Using the dry batteries – Sony D-NF611 User Manual

Page 30

Advertising
background image

30

-GB

You can use the following power sources:
• AC power adaptor (see “Playing an audio

CD or ATRAC3plus/ATRAC3/MP3 files”)

• LR6 (size AA) alkaline batteries

For the battery life, see “Specifications.”

Using the dry batteries

Use only the following dry battery type for
your CD player:
• LR6 (size AA) alkaline batteries

Note

Be sure to remove the AC power adaptor when
using the dry batteries.

1

Open the battery compartment lid
inside your CD player.

2

Insert two LR6 (size AA) batteries
by matching the

3

to the diagram

in the battery compartment and
close the lid until it clicks into
place.

B

Connecting to a power source

To remove the batteries

Remove the batteries as illustrated below.

When to replace the batteries

You can check the remaining power of the
batteries in the display.
Replace the batteries when “

” flashes.

t

t

t

t

t

Lo batt*

* Beep sounds.

When the batteries are depleted, replace both
batteries with new ones.

Notes

• The indicator sections of

roughly shows the

remaining battery power. One section does not
always indicate one-fourth of the battery power.

• Depending on operating conditions, the indicator

sections of

may increase or decrease.

To attach the battery compartment lid

If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.

Insert # end first
(for both batteries).

Advertising