Sharp X2 - Manual (Page 30)

18 Operations
Menu options (con’t)
Set mode (con’t)
Additional options available through the SET menu.
Option Description Parameters
Power Save Sets the idle time before the printer goes into its
power save mode. OFF -- 60min
(in 5min interval)
Maintenance
Interval Sets the frequency in which the printer runs the
maintenance routine. NONE/SHORT/MIDDLE/LONG
Init Cut
Enables/disables a media cut during new media
initialization. (Enable only when loading new
media and you know the media has a straight
edge.)
YES/NO
Date & Time
Set Sets the date and time. Use the cursor arrow
buttons <CSR> to move from year>month>date
or hour>minutes>seconds. Use the + or –
buttons to change the time and date numbers. YYYY/MM/DD
HH/MM/SS
<SET> S
MAINT. INTERVAL Î
INIT CUT Î
<MORE>
<SET> S
DATE SETÎ
TIME SETÎ
<MORE>
<MAINT. INTERVAL> S
* LONG +
-
ENTER Î
<DATE SET> S
* 2000/01/01 +
YYYY/MM/DD -
<CSR> ENTER Î
<TIME SET> S
* 12:34:56 +
HH:MM:SS -
<CSR> ENTER Î
<SET> S
MEDIA ATTRIBUTE Î
POWER SAVE Î
<MORE>
<POWER SAVE> S
* OFF +
-
ENTER Î
<INIT CUT> S
* YES +
-
ENTER О