Sharp OZ-640 - Manual (Page 10)

a
9
1
Setting up the Organizer after Initialization
The Organizer takes you through the various steps needed to
set up the Organizer before use. These steps are described
below. We strongly recommend that you complete the entire
SET UP procedure before starting to actually use your
Organizer.
* Welcome messages and instructions
* Setting the Owner Information
* Setting the Clock
* User’s Preferences
Welcome messages and instructions
After completing the LCD Contrast setting above, the Organizer
displays the following welcome message, briefly outlining its
functions.
Press [ENTER] to proceed with the User Setup.
The User Setup introduction appears to explain the operations
you are about to carry out.
Press [ENTER] to continue.
The User Setup Basic Instructions appear to instruct you how
to move around the screen during User Setup and normal use.
You can use [ ] [ ] [ ] [ ] to move around the screen.
You can also use [PREV] and [NEXT] to move from field to
field.
Press [ENTER] to proceed with setting the Owner Information
(or [CANCEL] to exit the SETUP procedure).
Setting the Owner’s Information
The Owner Information comprises your name, address and
telephone number.
* If you make a mistake while entering the Owner
Information, don’t worry! You can amend the Owner
Information easily during normal use, so just proceed with
the rest of the User Setup. (see PREFERENCES, p.82)
1. After pressing [ENTER] after the previous Basic
Instructions screen, the Set Owner Information screen
appears.
5-16 8/6/98, 4:04 PM 9