Sharp FO-2970M User Manual

Page 59

Advertising
background image

Sending a Fax by Automatic Dialing

57

2. Sendi

ng

Doc

u

ments

Dual Access

The fax machine features full dual access, which means that you can
load a document and dial by automatic dialing even when the fax
machine is occupied with another operation. After you dial, your
document will be immediately scanned into memory and then
transmitted once all previously set operations have been completed.

If more than one document has been scanned into memory for
transmission, the documents will be transmitted in the order in which
they were scanned.

♦ The fax machine can hold approximately 280 pages of average

content in memory. Less pages can be held if any pages are scanned
using fine or halftone resolution.

♦ The maximum number of transmission jobs that can be held at once

is 30.

♦ The amount of memory currently occupied appears as a percentage

(M:00%) in the display.

If the memory becomes full...

If the memory becomes full while a document is being scanned,
MEMORY FULL will appear in the display. Press the START key or
the STOP key as follows:

♦ Press the START key if you want to transmit the pages which have

been stored up to that point in memory. The remaining pages will be
ejected from the feeder. After transmission, the memory will be
cleared and you can transmit the remaining pages. You will also
need to transmit the page which was being scanned when the
memory filled up.

♦ Press the STOP key if you want to cancel the entire transmission.

all-fo2970.book Page 57 Monday, July 24, 2000 7:45 AM

Advertising