Sony CDP-CE275 - Manual (Page 9)

9
Playing CDs
Other Operations
To
Stop playback
Pause
Select a track
Select a track directly
Go to the next disc
Select a disc directly
Find a point in a track
Play tracks in random
order
Remove the CD
Adjust the volume
* When you directly locate a track numbered over 10,
press >10 first, then the corresponding number
buttons. To enter “0,” use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
Tips
• You can adjust the analog output level with the
ANALOG OUT LEVEL +/– on the remote (page 6)
(CDP-CE375 only).
• You can adjust the headphones volume on the
remote. To adjust the volume, connect the
headphones to the PHONES jack and adjust the
volume with the ANALOG OUT LEVEL +/– on
the remote (CDP-CE375 only).
• If there is no CD in the player, “no dISC” appears
in the display.
Notes
• If “ ” appears in the display, the disc has
reached the end while you were pressing M. Press
m or turn lAMSL counterclockwise to go
back.
• If you press ANALOG OUT LEVEL +/– on the
remote while recording, the recording level will
change even when it is preset on the tape deck, etc
(CDP-CE375 only).
Using the CD display
You can check information about the disc using
the display.
In the stop mode
Press TIME.
The display shows the current disc number, the
total number of tracks, total playing time and
music calendar.
The information also appears when you press
AOPEN/CLOSE to close the disc tray.
The tracks numbered over 20 cannot be
displayed in the music calendar.
Notes on the disc number
indications
• The red circle around a disc number
indicates the disc is ready to be played.
• When all the tracks on a disc have been
played, the semi-circle around the disc
number disappears.
• When a disc compartment is recognized as
empty, the semi-circled disc number
disappears.
During normal playback
While playing a disc, the display shows the
current disc number, track number, playing
time of the track and the music calendar.
The track numbers in the music calendar
disappear after they are played.
Do this
Press x.
Press X. Press X again or
H to resume play.
During play or pause, turn
lAMSL clockwise
(to go forward) or
counterclockwise (to go
backward)
(or press >( to go
forward) or . (to go
backward) on the remote
(CDP-CE375 only)).
Press the number button on
the remote (CDP-CE375
only).*
Press DISC SKIP.
Press DISC 1 – 5.
Press and hold M or m
during playback, and
release at the desired point.
Press PLAY MODE until
“SHUFFLE” appears in the
display.
Press AOPEN/CLOSE.
Press ANLOG OUT
LEVEL +/– on the remote
(CDP-CE375 only).
Total number of tracks Music calendar
Total playing time Current disc number
continued
1 2 3 4 5
6 7 8 9 10
1 2 3 4 5 DISCS ALL
TRACK DISC MIN SEC
1 10
4 5 2 8