Freezing the current picture, Plug & play feature – SRS Labs Plasma Display Panel Television User Manual

Page 10

Advertising
background image

English - 10

Freezing the Current Picture

You can freeze the picture when watching a television programme simply by
pressing the STILL button. To return to normal viewing, press it again.

➢

To prevent screen burn-in, this function will automatically cancel after
5 minutes.

Plug & Play Feature

1

If the television is in standby mode, press the POWER (

) button

on the remote control. The message to start Plug & Play is displayed.

2

The Language menu will automatically appear after several seconds.

3

Select the appropriate language by pressing the … or † button.
Press the ENTER/OK (

) button. The message to check the connected

status of the antenna is displayed.

4

Make sure that the antenna is connected to the TV.
Press the ENTER/OK (

) button. The Country menu is displayed.

5

Select your country or area by pressing the … or † button.
Press the ENTER/OK (

) button. The menu to select channels is

displayed.

6

To start channel store, press the ENTER/OK (

) button.

The search will end automatically. The TV will begin memorizing all of the
available channels.
Press the ENTER/OK (

) button to set the clock.

7

Press the œ or √ button to select the hour or minute.
Set these by pressing the … or † button.

➢

You can enter the Hour, Minute by using the numeric buttons on the
remote control.

8

Press the ENTER/OK (

) button to confirm your setting.

The DTV channel scan menu appears and the DTV channel is automatically
updated.

➢

If the DTV channel is updated, the Source in the source list of the Input
menu is automatically changed to DTV.

➢

For detailed descriptions about DTV channel update, refer to page 28 of
this manual.

If you want to reset this feature …

1

Press the MENU (

) button to display the menu.

2

Press the … or † button to select Setup, then press the ENTER/OK (

)

button.

3

Press the ENTER/OK (

) button again to select Plug & Play.

The message to start Plug & Play is displayed.

When the television is initially powered on, several basic customer settings proceed
automatically and subsequently.
The following settings are available.

Start Plug & Play

OK

Plug & Play

Enter

Exit

Setup

Move

Enter

Return

Plug & Play
Language

: English

Time

Game Mode

: Off

Blue Screen

: Off

Melody

: Off

PC

More

TV

BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 10

Advertising