SRS Labs Plasma Display Panel Television - Manual (Page 9)

English - 9
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the figure.
2 Install two AAA size batteries.
➢
Make sure to match the “+” and “–” ends of the batteries with the diagram
inside the compartment.
3 Close the cover as shown in the figure.
➢
Remove the batteries and store them in a cool, dry place if you won’t be using
the remote control for a long time. The remote control can be used up to
about 23 feet from the TV. (Assuming typical TV usage, the batteries last for
about one year.)
➢
If the remote control doesn’t work! Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
The main lead is attached to the rear of the television.
1 Plug the main lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2 Press the (Power) button (On/Off) on the front of the television or press the POWER ( ) button on the remote
control to switch the television on. The programme that you were watching last is re-selected automatically. If you
have not yet stored any channels, no clear picture appears. Refer to “Storing Channels Automatically” on page
11 or “Storing Channels Manually” on page 12.
➢
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to “Plug & Play Feature” on page 10.
3 To switch the television off, press the (Power) button (On/Off) on the front of the television or press the
POWER ( ) button on the remote control.
4 To switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER ( ) button
or number buttons on the remote control.
Switching Your Television On and Off
Viewing the Menus
1 Press the MENU ( ) button.
The main menu is displayed on the screen.
Its left side has five icons: Input, Picture, Sound, Channel, and Setup.
2 Press the … or † button to select one of the icons.
Press the ENTER/OK (
) button to access the icon’s sub-menu.
3 Press the … or † button to move to items in the menu.
Press the ENTER/OK (
) button to enter items in the menu.
4 Press the …/†/œ/√ button to change the selected items.
Press the MENU (
) button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Input
Move Enter Exit
Source List : TV
Edit Name
TV
e
e
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 9