SRS Labs Plasma Display Panel Television - Manual (Page 31)

English - 31
Installing the CI card
1 Purchase the CI CAM module by visiting your nearest dealer or by phone.
2 Insert the CI card into the CAM in the direction of the arrow until it fits.
3 Insert the CAM with the CI card installed into the common interface slot.
➢
Insert the CAM in the direction of the arrow, right up to the end so that it is
parallel with the slot.
4 Check if you can see a picture on a scrambled signal channel.
➢
You can install the CAM anytime whether the TV is ON or OFF.
d
,
e
n.
h
n
BN68-00889W-01Eng(Spa) 9/20/06 3:15 PM Page 31