Kodak CX4310 - Manual (Page 31)

23
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light is allowed into the
camera. The exposure range is +2 to -2 in 1/2-step increments.
NOTE: This setting is ideal for controlling pictures in which the light source is
behind the subject (backlit), or for correcting pictures that are too light
or too dark.
1 In Capture mode, press the Menu button.
2 Highlight Exposure Compensation , then press the OK button.
3 Press to select the
Exposure Compensation setting.
!
If your pictures are too light,
press
to decrease (-) the
value.
!
If your pictures are too dark,
press
to increase (+) the
value.
4 Press the OK button to accept the
change and return to the menu
screen.
5 Press Menu to exit the menu
screen.
This setting remains until you
change it.