Setting the orientation sensor – Kodak CX4310 User Manual
Page 34
26
Chapter 2
Setting the Orientation Sensor
If you rotate the camera to take a picture (for example, a portrait shot), the
Orientation Sensor rotates the picture so it is displayed correct side up during
Quickview and Review.
The Orientation Sensor is turned on as the default. You can turn it off so that
pictures are displayed in their original orientation.
NOTE: When your subject is above or below you (such as pictures of an object
in the sky, on the ground, or when pointing down at small objects on a
table), turn off the Orientation Sensor so that pictures are not rotated
unnecessarily.
1
In Capture mode, press the Menu button.
2
Highlight Orientation
, then press the OK button.
3
Highlight On or Off, then press the OK button.
4
Press the Menu button to turn off the menu.
This setting remains until you change it.