Kodak CX4310 - Manual (Page 50)

42
Chapter 5
Returning to the Previous Menu
The Return feature lets you return to the menu screen from which you entered
the Setup menu.
!
In the Setup menu, highlight Return ,
then press the OK button.
You are returned to the menu screen
from which you entered Setup: Capture or
Review.
Changing the Print Quantity Default
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen (see
page 38 ). The default value is one.
1 In Capture or Review mode, press the Menu button.
2 Highlight Setup , then press the OK button.
3 Highlight Default Print Quantity , then
press the OK button.
4 Press to indicate the new default
quantity, then press the OK button.
5 Press the Menu button to turn off the menu.
This setting remains until you change it.