7 connecting to the computer, Important—before you connect, Connecting to the computer – Kodak CX4310 User Manual
Page 59: Transferring pictures with the usb cable
51
7
Connecting to the Computer
Important—Before You Connect
Install the software from the Kodak EasyShare software CD BEFORE you
connect the camera or camera dock to the computer.
Connecting to the Computer
You can transfer your pictures from the camera to the computer using either
the camera alone or the optional Kodak EasyShare camera dock or camera
dock II. See
for connecting with a camera dock.
Transferring Pictures With the USB Cable
1
Turn off the camera.
2
Plug the labeled (
) end of the USB cable
into the labeled USB port on your computer.
See your computer User’s Guide for details.
3
Plug the other end of the USB cable into the
labeled USB port on the camera.
4
Turn on the camera to begin transferring.
Kodak EasyShare software opens on your
computer and prompts you through the
transfer process.
An optional AC adapter is available for your camera; it saves battery power
when transferring pictures (see
NOTE: You can also use a Kodak multi-card reader or Kodak SD multimedia
card reader-writer to transfer your pictures. See a dealer of Kodak
products or visit our Web site at