Konica Minolta BIZHUB C30P - Manual (Page 172)

Replacing Consumables 158
19
Close the front cover.
20
Reset the counter in the MAINTENANCE MENU/SUPPLIES/
REPLACE/TRANS. BELT menu.
Replacing the Backup Battery
If the backup battery is dead, the printer’s date and time cannot be retained.
Follow the procedure described below to replace the backup battery.
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 226. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.