Konica Minolta BIZHUB C30P - Manual (Page 246)

Hard Disk Kit 232
6
Insert the three mounting pins
on the hard disk drive into the
holes in the controller board in
the order shown in the illustra-
tion at the right to mount the
hard disk drive onto the control-
ler board.
7
Reinstall the panel and tighten the seven screws.
8
Attach the rear cover.
9
Reconnect all interface cables.
10
Reconnect the power cord, and
turn on the printer.
11
Declare the Hard Disk in the Windows printer driver (Properties/Configure
tab).