Konica Minolta BIZHUB C30P - Manual (Page 35)

Using the Postscript and PCL Printer Driver 21
„ Print the watermark on only the first page
„ Print the watermark repeatedly throughout the all pages (PostScript
printer driver only)
Quality Tab
The Quality Tab allows you to
„ Switch between color and grayscale printing
„ Control the darkness of an image (Brightness)
„ Specify the printer color settings (Quick Color)
„ Specify the resolution for the printout
„ Perform color separation
„ Select whether or not economy printing is used
„ Set the edge strength to Low, Middle or High
„ Turn on/off glossy mode
„ Specify the format of fonts that are to be downloaded
„ Print using the printer’s fonts
„ Control the tones of an image (Contrast) (PCL printer driver only)
„ Specify the image compression method (PCL printer driver only)
Version Tab
The Version Tab allows you to view information about the printer driver.
Limitations on printer driver functions installed with
Point and Print
If Point and Print is performed with the following server and client combina-
tions, there are limitations on some printer driver functions.
„ Server and client combinations
Server: Windows Server 2003/XP/2000
Client: Windows NT 4.0
„ Functions with limitations applied
Booklet, Skip Blank Pages, Front Cover Page, Back Cover Page, Separa-
tor Page, Create Overlay, Print Overlay, Watermark
*JOBNAME, USERNAME, and HOSTNAME output of PJL
When using these operating system combinations, install the printer driver on
the client with a local connection, and then specify the shared printer installed
on the server as the connection.