Konica Minolta BIZHUB C30P - Manual (Page 33)

Using the Postscript and PCL Printer Driver 19
Basic Tab
The Basic Tab allows you to
„ Specify the orientation of the media
„ Specify the size of the original document
„ Select the output media size
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Specify the number of copies
„ Turn on/off job collation
„ Turn on/off offset
„ Save a print job on the printer and print it later (Job Retention)
„ Save a confidential job on the printer and protect it with a password
„ Print a single copy for proofing
„ Send a notification by e-mail when printing is finished
„ Specify user information such as e-mail addresses and passwords
„ Specify user authentication and account track settings
„ Print on the back side of paper that has already been printed on
"
Use paper that has been printed on with bizhub C30P.
In addition, the page printed with this setting is not guaranteed.
"
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color lase
printer/copier
- Paper that has been printed on with any other printer or fax machine
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Specify booklet printing
„ Rotate the print image 180 degrees
„ Specify duplex (Double-Sided) printing
„ Select the output tray for the staple finisher
„ Select whether or not to staple with the staple finisher