Kyocera KM-C2230 - Manual (Page 36)

2.1 Paper Settings 2
2-9
Pa
pe
r S
e
tt
ing
s
Ch
apte
r 2
6
Using the keypad, type in the length of side
X for the paper that is loaded (between 140
and 457 mm). (As an example, the following
screen shows a specified setting of 200
mm.)
7
Touch , and then use the keypad to
type in the length of side Y for the paper that
is loaded (between 90 and 311 mm). (As an
example, the following screen shows a
specified setting of 100 mm.)
8
Touch or .
The paper size specified in steps 4 and 5 (or
6 and 7) appear on
or .