2 selecting output settings -4, 2 selecting output settings – Kyocera KM-C2230 User Manual
Page 83
Advertising
5
5.2 Selecting Output Settings
5-4
Sp
ec
if
yi
n
g
C
o
py
Se
tt
in
gs
Cha
p
ter 5
5.2 Selecting Output Settings
}
Reference
For details, refer to “Selecting Output Settings”
on page 3-8 of the User’s Guide.
Various settings are available for sorting and finish-
ing copies when they are fed into the copy output
tray.
The following three sorting and output methods are
available.
●
Non-sorting/Sorting (“Non-Sort”/“Sort” settings)
●
Stapling (“1 Staple”/“2 Staples” settings)
●
Hole-punching
✎
Additional Information
If Finisher (DF-626) is installed, the “1 Staple”,
“2 Staples” and “Hole-Punch” settings are avail-
able.
If Finisher (DF-621) is installed, the “1 Staple”
setting is available.
Advertising