3 queuing a copy job for the multiple – Kyocera KM-C2230 User Manual
Page 71
Advertising
4
4.3 Queuing a Copy Job for the Multiple Bypass Tray
4-8
Us
efu
l O
p
e
ratio
ns
Ch
apte
r 4
4.3 Queuing a Copy Job for the Mul-
tiple Bypass Tray
If the “Auto Paper Select” setting is specified and no
tray or drawer is set to the desired paper size or
type, select the “Bypass Reservation” setting to
scan the document and begin printing when paper
of the desired size and type is loaded into the mul-
tiple bypass tray.
To queue a copy job for the multiple by-
pass tray
1
Load the document to be copied, and then
press the [Start] key in the control panel.
After scanning of the document begins, the
message “Matching paper size is not avail-
able. Reselect paper size.” appears, and
scanning stops.
Advertising