Kyocera KM-C2230 - Manual (Page 77)

4 4.4 Interrupting a Copy Job
4-14
Us
efu
l O
p
e
ratio
ns
Ch
apte
r 4
4
Press the [Start] key in the control panel.
After the document is scanned, the job cur-
rently being printed is paused, and the job
that printing was interrupted for is printed.
5
After the interrupting copy job is finished, re-
move the printed pages from the copy out-
put tray, and then press the [Interrupt] key in
the control panel.
The indicator on the [Interrupt] key goes off,
and the message “Now in Interrupt mode.”
disappears.
The interrupted job continues printing.