Kyocera KM-C2230 - Manual (Page 42)

2.1 Paper Settings 2
2-15
Pa
pe
r S
e
tt
ing
s
Ch
apte
r 2
5
Touch , , and to select the
length of side Y for the paper that is to be
loaded (between 3-9/16 and 12-1/4 inches).
(As an example, the following screen shows
a specified setting of 11-3/4 inches.)
❍ Touch until the cursor moves below
the value that you wish to change.
After specifying the paper size setting, con-
tinue with step 8.
✎
Additional Information
If custom paper sizes have been stored, in-
stead of performing steps 4 and 5, a stored pa-
per size setting can be selected by
pressing
or .
For details on storing custom paper sizes, refer
to “To store a non-standard (custom) paper
size for the multiple bypass tray” on page 2-18.