KTM 990 SUPER DUKE - Manual (Page 60)

BULB FOR THE TAILLIGHT:
Remove the bulb socket [1] from the housing and pull the bulb out of the socket. Insert a
new bulb and press the bulb socket all the way into the taillight housing.
Mount the seat.
Replacing the flasher bulbs
Remove the screw on the back of the turn signal, carefully fold the lens [2] towards the
motorcycle and remove. Turn the cap [3 approx. 15° in a counterclockwise direction and
remove.
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out of the socket.
To mount the lamp reverse the worksteps indicated above.
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
59
2
3
1