KTM 990 SUPER DUKE - Manual (Page 71)

Mount the oil drain plug on the engine with a new seal ring and tighten to 20 Nm.
Slide the oil screen [1] into the guides in the oil pump housing with the TOP mark fac-
ing up. Make sure the form ring is in place and mount the cap [2]. Tighten the screws to
10 Nm.
Insert a new oil filter [3] in the engine case, grease the O-ring and mount the oil filter cover
together with the O-ring. Tighten the screws to 6 Nm.
ONLY USE ORIGINAL KTM OIL FILTERS. THE ENGINE CAN BE DAMAGED IF OTHER FILTERS ARE
USED.
Mount the oil drain plug on the oil tank with a new seal ring and tighten to 20 Nm.
Grease the seal ring [4] and carefully slide the oil screen into the oil tank. Position the oil
return valve [5], mount the screws and tighten to 10 Nm.
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
70
2
1
3
5
4