Konica Minolta Konica Digital Revio KD-200Z - Manual (Page 17)

17
Pr
eparation
1
q
w
Battery life guide (reference)
Recording (LCD monitor on) Recording (LCD monitor off) Continuous playback
CR-V3 lithium battery About 500 images About 1250 images About 300 minutes
AA alkaline batteries About 150 images About 300 images About 75 minutes
* Under Konica test conditions (room temperature, Super Fine mode, 50% flash, continuous recording at 20
second interval, and one zoom operation in single direction)
Note:
* Battery life varies according to the brand and grade.
* The above values are for reference only and are not guaranteed.
* Power is consumed by the following operations even when not recording and these will reduce the number of
images that can be recorded.
• Repeated focus operations by pressing the shutter button halfway.
• Repeated zoom operations.
• Extensive use of the LCD monitor in the Playback mode.
• Communication with a PC.
Warning: When you continue using the camera
for a long time, the batteries become
hot. Contact with the batteries can lead
to burns.
Caution: Do not use new batteries with old ones.
Do not use a mix of different types, differ-
ent manufactures, different classifications
of batteries.
Do not use rechargeable batteries with
substantially different charge status.
AC adapter (optional)
● Insert the AC adapter into a wall outlet of 100V AC (1). Next, connect the power cable of
the AC adapter into the AC adapter jack on the camera (2).
Handling the AC adapter
● Be sure to read the “Safety Precautions” in this
manual (pages 6, 7 and 8).
● Always use the specified AC adapter (DR-AC2).
Otherwise fire and/or electrical shock may oc-
cur as a result.