Focus lock recording, Recording using the lcd monitor – Konica Minolta Konica Digital Revio KD-200Z User Manual

Page 25

Advertising
background image

25

2

Basic Recor

ding

Focus Lock Recording

Use the following procedure if the subject to record is not in the center of the viewfinder.

q Position the subject so that it falls within the

focus frame and lightly press the shutter but-

ton (halfway).

The viewfinder LED will light green and the

focus position will be locked.

Note:

* Exposure is locked when the viewfinder LED is lit green.

* Releasing the finger from the shutter button after locking

the focus position will cancel the focus lock. In this case,

the focus cannot be re-locked.

w While continuing to hold the shutter button

down lightly (halfway), re-position the sub-

ject for the desired composition and gently

press the shutter button down completely to

record.

Recording using the LCD monitor

As well as using the viewfinder, the LCD monitor can be used for recording.

q Set the main switch on the top of the cam-

era to

and press the DISPLAY button.

The through image (the image as seen

through the lens) will be displayed on the LCD

monitor.

w Record by referring to the LCD monitor.

Note:

* Recording procedure is the same as when using the

viewfinder.

q

w

q

MENU

DISPLAY

Through image

(The image as seen through the lens)

Advertising