Konica Minolta Konica Digital Revio KD-200Z - Manual (Page 23)

23
2
Basic Recor
ding
* The LEDs will flash in green even when the distance between the camera and subject is out
of the auto-focus range (normal recording: 0.8m ~
∞, macro recording: 0.25m ~ 0.8m).
Recording
Normal recording is performed with the subject a distance of more than 0.8m. For distances
between 0.25m to 0.8m from the subject, see “ (Macro Recording) mode (page 32)”.
q Check to make sure that an SD Memory
Card/Multi-Media Card is properly inserted.
w Set the main switch on the top of the cam-
era to .
The lens will extend.
* If the main switch is set to while the lens is
being held, “Err” may appear in the status LCD.
If this occurs, turn the main switch to OFF and
turn it back to
e Press the PICTURE button to set the picture
quality of the image data to record.
(Default setting is . To change the set-
ting, see “Setting the Picture Quality” (page
28).)
r Press the MODE button to set the recording
mode.
(Default setting is . To change the set-
ting according to the subject, read from “Se-
lecting the Recording Mode” (page 29) to
“ (Self-timer) Mode” (page 34).)
t Look through the viewfinder to determine the
image composition, and then press the
(W) and (T) buttons to set the subject size.
At this time the image is focused, based on
the center auto-focus frame within the
viewfinder. (See page 22.)
w
e
r
OFF
M
MODE
PICTURE
MODE
PICTURE
t
W T