Kowa KE811CT - Manual (Page 23)

Remark 7
Remark 1
Remark 1
Remark 3
Remark 4
Remark 5
Remark 6
Remark 2
Remark 2
Remark 8
Remark 8
Remark 1 : This character is used to select output.
Remark 2 : This character is used when POWER CONT, OPTION are ON/OFF.
Remark 3 : This character is used to select output (CAT5) when DISPLAY POWER is ON.
Remark 4 : This character is used to select output (CAT5) when DISPLAY POWER is OFF.
Remark 5 : This character is used to select output (SUB) when DISPLAY POWER is ON.
Remark 6 : This character is used to select output (SUB) when DISPLAY POWER is OFF.
Remark 7 : no character Only ASCII code , not described by character.
Remark 8 : "ACK" is answer backing. When this product was able to receive the command,
it returns "ACK."
"NAK" is answer backing. When this product was not able to receive the command,
it returns "NAK."
5-3. Control and registration method
5-3-1. Control method
Control method code table (video audio synchronization)