Kowa KE811CT - Manual (Page 33)

8 Trouble shooting
The video can't be
seen
The video is
flickering or there
is noise
Is the power of the connection equipment turned on ?
Is the power adapter cable properly connected to
AC100-240V line and this product ?
Is the POWER CONT button of this product turned on?
Is the CAT5e or CAT6 cable properly connected to OUT 1
or OUT2 of this product?
Isn't unexpected fore applied to the CAT5e or CAT6 cable
connected to OUT1 or OUT2 of this product ?
Is the cable properly connected to the video input connector?
Is the INPUT button properly selected ?
Is the CAT5 SUB button properly selected ?
Are cables properly connected to IN connectors?
Is the length of the cable within the recommended maximum
transmission distance ?
Are the cables wired correctly?
Is the power of the twisted pair receiver turned on ?
Did you adjust a LEVEL /PEAKING of a twisted pair receiver?
Is the twisted pair cable near the AC line? It should be far
from the line.
Is there a source causing noise close to AC adapter of this
product ? A noise filter should be used in case of noise.
Is the CAT5e or a CAT6 cable properly connected to OUT 1 or
OUT2 of this product ?
Isn't unexpected fore applied to the CAT5e or CAT6 cable
connected to OUT1 or OUT2 of this product ?
Is the cable properly connected to the video input connector
of this product?
Are cables properly connected to IN connectors?
Is the length of the cable within the recommended maximum
transmission distance?
Did you adjust a LEVEL /PEAKING of a twisted pair receiver?
3-3.Cable mounting kit
and Rack mounting kit
3-3.Cable mounting kit
and Rack mounting kit
4-3.Operation of buttons
4-3.Operation of buttons
1-2.General information
1-2.General information
3-2.Preparation of cable
Sound can't be output Is the power of the connection equipment turned on ?
Is the POWER CONT button of this product turned on?
Is the power adapter cable properly connected to
AC100-240V line and this product ?
Is the INPUT button properly selected ?
Is the CAT5 SUB button properly selected ?
Is the CAT5e or CAT6 cable properly connected to OUT 1
or OUT2 of this product?
Isn't unexpected fore applied to the CAT5e or CAT6 cable
connected to OUT1 or OUT2 of this product ?
Is the cable properly connected to the AUDIO IN connector
of this product?
Is the power of the twisted pair receiver turned on ?
Is the length of the cable within the recommended maximum
transmission distance?
3-3.Cable mounting kit
and Rack mounting kit
1-2.General information
Please refer to the instructions
manual of the receiver with
this product.
Please refer to the instructions
manual of the receiver with
this product .