Kambrook KFP95 - Manual (Page 10)

10
Assembly and operation of Your
850W Food Processor
Fig. 2
WARnInG: All blades
must be handled
carefully as they are
sharp!
Using the Processing/
Mixing Blade
a. Select either the processing or
plastic mixing blade.
b. Place the processing/mixing blade
over the drive shaft and push down.
Fig. 3
Your 850W Food Processor features 2
safety locking devices.
notE: The food processor will
not work unless all of the below
are in place:
1. The processor bowl is correctly
LOCKED into position.
2. The processor lid is correctly LOCKED
into position.
notE: Always ensure that the
Food Processor is disconnected
from the power outlet and the
Speed selection Dial is turned
to the ‘OFF’ position before
assembling or disassembling
the Food Processor.
Correct Placement of the
Processor Bowl
Place the empty bowl onto the base,
with the handle on your right align the
arrow on the processor bowl handle
with the align arrow
on the
motor base. Turn the bowl clockwise
until the arrow on the processor
bowl handle is aligned with the ‘lock’
indicator arrow
on the motor base.
Fig. 1
KFP95_IB_FA.indd 10 16/11/09 4:40 PM