Konftel 300 - Manual (Page 16)

28 29
ADJUSTING R-PULSE (FLASH DURATION)
Different countries and PBXs may require different durations for activating the R-pulse.
Duration requirements should be specified in the technical data for the PBXs.
 Press the MENU button.
 Mark the SETTINGS option using the arrow buttons and press OK to
confirm.
 Mark the R-PULSE option using the arrow buttons and press OK to
confirm.
 Select the R-pulse duration for your PBX using the arrow buttons.
Applicable settings:
100 ms – Scandinavia, Europe, Siemens HiPath
300 ms – Germany, France, Israel
500 ms – USA
 Confirm your choice of R-pulse duration by pressing OK.
ADJUSTING MICROPHONE VOLUME WITH MOBILE PHONE
CONNECTED
The Konftel 300 microphone has seven volume settings, so if the volume of calls via DECT/
GSM phones is too soft or too loud, you can easily adjust it to the right level.
 Press the MENU button.
 Mark the SETTINGS option using the arrow buttons and press OK to
confirm.
 Mark the MOBILE LEVEL option using the arrow buttons and press OK
to confirm.
 Mark the signal level you want using the arrow buttons and press OK to
confirm.
The SETTINGS menu reappears and you can make further changes if you wish. Otherwise,
press the
MENU button to exit the menu.
SETTINGS
ADJUSTING SOUND (EQUALISER)
The sound reproduction can be adjusted to the required pitch (SOFT, NEUTRAL and
BRIGHT).
 Press the MENU button.
 Mark the SETTINGS option using the arrow buttons and press OK to
confirm.
 Mark the EQUALIZER option using the arrow buttons and press OK to
confirm.
 Select one of the three sound settings using the arrow buttons and
press OK to confirm.
The SETTINGS menu reappears and you can make further changes if you wish. Otherwise,
press the
MENU button to exit the menu.
SETTINGS FOR CONNECTING EXTERNAL EQUIPMENT
(AUX)
The Konftel 300 can be connected to a wireless headset and/or an external PA system. You
can purchase this software upgrade as an optional extra from your retailer (please see www.
konftel.com/300).
CHANGING TEXT ON THE DISPLAY SCREEN
The text on the display screen can be changed when the Konftel 300 is in stand-by mode.

Press the MENU button.
 Mark the SETTINGS option using the arrow buttons and confirm by
pressing OK.
 Mark the SCREEN TEXT option using the arrow buttons and confirm by
pressing OK.
 Delete existing text using C and enter your new text. Press OK to
confirm.
The SETTINGS menu reappears and you can make further changes if you wish. Otherwise,
press the
MENU button to exit the menu.
SETTINGS