Konftel 300 - Manual (Page 5)

6 7
CONNECTIONS
CONNECTIVITY OPTIONS
An analogue phone line is the pre-programmed option, but it is possible to switch between
and combine two connectivity options.
 Press the LINE MODE key.
 Use the arrow buttons to select a connectivity option and press OK to
confirm your choice.
Options
Connections: The display screen shows:
• Analogue telephone line ANALOGUE
• GSM/DECT telephone MOBILE
• Computer (VoIP) USB
• Analogue telephone line+computer ANALOGUE+USB
• Mobile/DECT telephone+computer MOBILE+USB
Please turn to page 9 for instructions on using the Konftel 300 with a computer and a
GSM/DECT telephone.
Connection to a PC
You can hold group calls over the Internet using VoIP software (e.g. Skype ® ) with the
Konftel 300. The Konftel 300 acts as a loudspeaker and microphone when making VoIP
calls. In stand-by mode
, it can also be used to play audio and music. When the
Konftel 300 is in stand-by mode, the display screen shows that the microphone is turned
off.
ANSWERING CALLS
A ring tone is heard and the blue LEDs start flashing.
 Press to answer.
The LEDs show a steady blue light. The duration of the call is shown
on the display screen.
ENDING CALLS
 End the call by pressing .
MAKING CALLS
 Dial the number.

Press .
The number is called and the LEDs show a steady blue light. The dura-
tion of the call is shown on the display screen.
Or:
 Press .
 Dial the number.
The number is called and the LEDs show a steady blue light. The dura-
tion of the call is shown on the display screen.
Redialling
 Press an arrow button.
The last number that you dialled appears on the display screen.
 Use the arrow buttons to look through previously dialled numbers.
 Press .
The number you select is dialled.
ANSWERING AND MAKING CALLS