KORG X50 - Manual (Page 79)

What you can do in Multi mode
73
Quick Star
t
In
tr
oduc
tion
S
etup
Pro
g
ra
m
C
ombina
tion
Multi
Effec
t
Global
Ar
peggia
tor
Drum Kit
Ex
ternal c
on
tr
ol
O
ther func
tions
Ap
pendic
es
What you can do in Multi
mode
A multi set has sixteen tracks. Each track consists
of one program, and parameters such as keyboard
zone, velocity zone, mixer settings, MIDI channel,
and filter settings.
See the illustration “Multi set structure and corre-
sponding pages.”
Multi mode has the following major functions.
• There are 128 multi sets. Each set lets you
assign a program to each of the sixteen tracks,
and you can combine these programs as splits
and layers just as in a combination.
• Each multi set lets you make settings for one
stereo insert effect, two master effects, and a
stereo master EQ.
• You can use two arpeggiators, and you can syn-
chronize them to your MIDI sequencer.
• By setting the “Status” of a track to INT or
BTH, you can play the X50 from your external
MIDI sequencer as a multi-track sound mod-
ule. (
☞PG p.55 “Multi Mode”)
• By setting the “Status” of a track to BTH, EXT,
or EXT, you can play an external sound module
on the MIDI channel of the “Control Track.”
(
☞PG p.56 “Multi Mode”)
• You can control the program parameters of a
track in realtime using AMS (Alternate Modu-
lation) or control changes. You can also use the
MIDI Sync. function to synchronize the LFO
speed to the tempo.
• You can use the Dmod (Dynamic Modulation)
function to control effect parameters in real-
time. You can also use MIDI Sync. to synchro-
nize the LFO speed or delay time to the tempo.
• You can assign a name to the multi set and to
each track.
• You can copy the settings of a combination to a
multi set.
• The “PLAY/MUTE” setting lets you quickly
mute or un-mute a desired track.
• The Tone Adjust function lets you make
detailed adjustments to the program used by
each track.
Overview of Multi set parameters
Select a program for each track
In the MULTI 0: Play, Program page, select a pro-
gram for each track.
Status and MIDI settings
In the MULTI 2: Track Param, MIDI page, set “Sta-
tus” to INT for the tracks that you want to play,
and set their MIDI channel to the global MIDI
channel.
Adjust the programs so that they fit
within the multi set
For each track program, specify the poly/mono
setting and adjust timbre parameters such as por-
tamento and transpose.
Layer, split, and velocity switch
In the MULTI 5: Key Zone, Key page and the 6: Vel
Zone, Vel page, specify the range (layer, split,
velocity switching, etc.) in which each program
will sound.
Effects
The output of each track can be sent to the insert
effect, the master effects, and the master EQ. You
can use the mixer section to freely specify how the
audio signals will be routed.
Insert Effect :
8–3, 4
AUDIO OUTPUT
L/MONO, R
Master Effect 1, 2 :
9–1...3
AUDIO OUTPUT
INDIVIDUAL 1,2
MasterEQ : 9–4
Controller Setup : 7–5
Arpeggiator: 7–1…5
(A, B)
BUS : 8–1, 2
Track
Insert Effect
Master Effect
Individual Outputs
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
MIDI IN
Track 7
Track 8
Control Track
MIDI Ch
Track 16
USB
Multi set structure and corresponding pages
1–1, 9–4, etc. indicate the X50 on-screen pages and tabs.
External MIDI
sequencer
The X50’s keyboard
Setting parameters
Setting parameters
Setting parameters
Setting parameters
Setting parameters
Setting parameters
Setting parameters
Setting parameters
Setting parameters