KTM 250 EXC RACING - Manual (Page 14)

ENGLISH
13
Hot start device (450/525 SX)
If you pull the hot start device 1 out as far as possible, a bore in the
carburetor will be opened through which the engine may take in additional
air. The result is a „lean“ fuel-air mixture of the type needed for hot starts.
To deactivate the hot start device, push the hot start button back into its
basic position.
Shift lever
The shift lever is mounted on the left side of the engine. The position of the
gears is shown in the illustration. Neutral, or the idle speed, is located
between first and second gear.
Kickstarter
The kickstarter is mounted on the right side of the engine. Its upper part
can be swivelled.
Foot brake pedal
The foot brake pedal is located in front of the right footrest. Its basic
position can be adjusted to your seat position (see maintenance work).
Side stand
Push the side stand to the ground with your foot and load it with the
motorcycle. Make sure that you put your bike on solid ground and in a
secure position. For off-road riding, you can use the rubber band
2 to
additionally secure the center stand in its folded-up position.
2,3,4 (5,6)
1
N
1
2