Konica Minolta 7130 - Manual (Page 148)

Positioning Title Pages on the Right Side (Chapter) (continued)
8-10
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
7.
Position originals FACE UP in the document feeder.
HINTS
• For details on positioning originals, see p. 3-2 to p. 3-4.
• Use RADF store mode (p. 3-24 to p. 3-26) when the original count
exceeds 50.
8.
Press [START].
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.