Konica Minolta 7130 - Manual (Page 255)

[4] E.C.M. (Electronic Copy Monitor) (continued)
11-19
How to Access the ECM Setting Mode
Key Operator Mode Screen ECM Master Key Code Screen
ECM Setting Menu Screen
Procedure
1 Touch 4. E.C.M. on the Key Operator Mode Screen. The ECM Master Key Code
Screen displays, if a code is required.
2 Use the keypad on the touch screen to enter your 8-digit ECM master key code, then
touch OK to display the ECM Setting Menu Screen.
NOTE:
If an invalid ECM master key code is entered, continue by entering the
valid 8-digit code.
3 Select the desired ECM function, and make settings, as required.
To exit the ECM mode, touch RETURN on ECM Setting Menu Screen.
4 To exit the Key Operator mode, touch RETURN on the Key Operator Mode Screen to
restore the Basic Screen.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode