Konica Minolta 7130 - Manual (Page 285)

11-49
[15] Density Shift
Density shift divides each of nine density levels into two levels of lighter and three
levels of darker when used in combination with Text/Photo Enhance.
Density shift selection can be made in each of four Text/Photo Enhance modes; Text/
Photo (general), Text, Photo, and Increase Contrast.
❒ Setting options: Density shift 0/ 1/ 2/ 3 (standard)/ 4/ 5
Key Operator Mode Screen Density Shift Setting Screen
Procedure
1 Touch [15] Density Shift to display the Density Shift Setting Screen.
2 Select the Text/Photo Enhance mode.
Touch Text/Photo, TEXT, PHOTO, or Increase contrast to highlight it, then enter the
desired density shift (from 0 to 5) using the Control panel keypad.
3 Touch OK to complete the settings and return to the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
Density shift 3
Density shift 2
Density shift 1
Density shift 0
Density shift 4
Density shift 5
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode