Konica Minolta 7130 User Manual
Page 75
Copying Using Memory (continued)
3-25
3.
Touch Store Mode to highlight it.
You may find the key already highlighted due to the copying selections made.
4.
Touch OK to return to the Basic Screen.
5.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
6.
Position original(s).
Using platen glass:
Place original FACE DOWN. Start scanning from the first page.
Reminder!
When Book Copy, Non-Image Area Erase, Auto detection mode of Repeat,
or AUTO Layout is selected, keep the RADF open throughout the scanning
procedure.
Using RADF:
Position originals FACE UP.
If the number of originals exceeds 50, divide them into blocks not exceeding 50
sheets and load them from the block with the first page.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode