Konica Minolta 7130 - Manual (Page 71)

Making Double-Sided Copies (1a2, 2a2) (continued)
3-21
5.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
6.
Touch SCAN on the Basic Screen.
The front side image of the double-sided copy will be scanned into memory.
7.
Replace the original on the platen glass with the back side down,
then touch SCAN.
DETAILS
Repeat this step until all originals are scanned.
Memory indicator on the upper right of the Basic Screen allows you to
check the remaining memory.
To delete the scanned data without printing, press [STOP/CLEAR].
8.
Press [START] to print.
All the data in memory will be output.
Press [STOP/CLEAR] to suspend the printing job.
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode