Konica Minolta 7130 - Manual (Page 248)

[2] Copier Initial (continued)
11-12
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 4.
Tray to display the Tray Initial Setting Screen.
2 Touch APS, or touch any tray key to select a specific tray.
3 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[5] Output
Set initial Output mode of the Finisher, Inner tray or exit tray to be effective after power
is turned on or after Auto Reset occurs.
Machine with Finisher
❒ Setting options: EXIT Tray 1/ Tray 2/ Tray 3/ Tray 4; OUTPUT MODE Non-sort/ Sort/ Group/
Staple; Automatic Rotation on/off
❒ Default setting: EXIT Tray 1; OUTPUT MODE Non-sort; Automatic Rotation ON
Machine with Inner Tray
❒ Setting options: EXIT Tray 1/ Tray 2; OUTPUT MODE Non-sort/ Group/ Rotation sort/
Rotation group; Automatic Rotation on/off
❒ Default setting: EXIT Tray 1; OUTPUT MODE Non-sort; Automatic Rotation ON
Machine without Finisher
❒ Setting options: OUTPUT MODE Non-sort/ Group/ Rotation sort/ Rotation group; Automatic
Rotation on/off
❒ Default setting: OUTPUT MODE Non-sort; Automatic Rotation ON
Key Operator Mode Screen Copier Initial Setting Menu Screen Output Mode Initial Setting Screen
(machine with Finisher)