Konica Minolta 7130 - Manual (Page 263)

11-27
[5] Lock Job Memory
Use this function to lock/unlock or delete a Job that has been programmed.
A locked Job is indicated by a lock icon (
) on the Lock Job Memory Screen.
The settings of a locked job cannot be changed.
❒ Setting options: Lock Job memory, Unlock Job memory, Delete Job memory
Key Operator Mode Screen Lock Job Memory Screen
Procedure
1 Touch [5] Lock job memory on the Key Operator Mode Screen to display the Lock
Job Memory Screen.
2 To lock/unlock a job memory;
(1) Touch the desired job number key to highlight it. Use arrow keys to scroll to the
desired job number, if required.
(2) Touch Job Lock. The lock icon will appear on the touched key to show that the
selected job is locked. The previously locked job will be unlocked when selected,
and the lock icon on the touched key will disappear.
To delete a job memory;
(1) Touch the job number you want to delete. Use arrow keys to scroll to the desired
job number, if required.
(2) Touch DEL.
Selected programs and the name will be deleted from the job memory.
NOTES:
• A locked job can also be deleted, with the lock on the job number
released at the same time.
• Once deleted, the programs cannot be restored.
3 Touch RETURN to complete the setting and return to the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode