Konica Minolta 7130 - Manual (Page 91)

3-41
Checking Feature Selections and Proof Copying
Use the Check mode to confirm copying selections before starting print operation.
In this mode, use Proof copy to produce a sample of the copied set before making
multiple copies. This is a convenient and cost effective way of viewing the results of the
following copying selections.
• Copying conditions using Store mode • Booklet
• Sheet/Cover insertion • Image insert
• Chapter • Book Copy
• Combination
>>> Specifications for Check Mode and Proof Copy<<<
❒ Proof copy is available when using RADF or Platen store mode for multiple originals.
❒ Proof copy cannot be used for testing the Userset density.
❒ Proof copy is not compatible with Group or Rotation group output mode and
Reserve mode.
1.
Select the desired copy conditions and enter the desired print quantity.
Reminder!
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Position original(s).
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
3.
Press [CHECK] on the control panel.
The Check Screen will be displayed.
2 3 1
5 6 4
8 9 7
0
CLEAR QTY.
STAR
CHECK
HELP
AUTO RESET
OUTPUT
APPLICATION
SCANNER / PRINTER FAX
DATA
INTERRU
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode