Kenwood Excelon DDX7015 - Manual (Page 24)

Tuner Control
Direct Search
Tunes in a station when its frequency is
entered.
—
When you enter them, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
The operation ends automatically if you do not
operate within 10 seconds.
Enter a frequency 3
Selects the Direct Search mode 2
Select a band 1
Traffic Information
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
When the traffic bulletin starts...
The Traffic Information screen appears automatically.
Traffic Information screen
1 Calls the Sound Effects Menu. (see page 84)
2 Calls the Setup Menu. (see page 57)
3 Turns the Traffic Information function on or off.
During reception of traffic information the
adjusted volume is automatically remembered,
and the next time it switches to traffic
information it's automatically the remembered
volume.
Please note that if DSP unit (optional accessory)
is connected, the volume will be preset by
pressing the
button for 2 seconds or
more.
T I
English
24 English
ATT
NEWS
IN
TI
AF
T r a f f i c I n f o m a t i o n
1 3 : 5 0 T U N E R
Set Up
Audio T I
Direct
SRC
2
3
1
DDX7015/7045_K(En)v3.9 04.4.18 9:42 AM ページ24