Kenwood Excelon DDX7015 - Manual (Page 72)

Setup Menu
Displaying the AV I/F 1 screen
AV I/F 1 screen
AV I / F S e t Up
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (see page 84)
3 Calls the Setup Menu.
4 Selects a navigation system connection. ( RGB)
"RGB" Allows the Kenwood’s Navigation System
to connect via its interface cable.
"AV-IN": Allows a third-party navigation system to
connect via the AV INPUT port.
"OFF" Must be used if no navigation system is
connected. (The navigation display is
cancelled when the AV source is switched.)
5 Sets a name to be displayed when you select a
system that is connected via the AV INPUT port.
(
VIDEO)
If you have set the navigation system connection to
"AV-IN", the display is fixed to "NAV".
6 Sets an image display of the system that is
connected via the AV INPUT port. ( Normal)
"Normal" When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"AUTO": When an image signal is entered via the
AV INPUT port, this image is displayed.
7 Sets how the rear camera image is displayed.
"Reverse": Displays with left and right reversed.
"Normal": Displays as it is.
"R-CAM View" can be set only when "AV-IN Name"
is set to "R-CAM".
8 Displays the AV I/F 2 screen.
If is not shown,
touch or to display it.
AV I / F S e t Up
M e n u
AV I / F 1
N o r ma l
V I DEO
AV - I N
N AV
A V - I N N ame
A V - I N
N o r ma l
R - C A M V i e w
Set Up
SRC
Audio
1
4 4
7
8
5 5
6
3
2
English
72 English
AV Interface
You can set audio and visual (AV) interface parameters.
DDX7015/7045_K(En)v3.9 04.4.18 9:42 AM ページ72