Kenwood Excelon DDX7015 - Manual (Page 90)

Sound Effects Menu
English
90 English
Zone Control
You can set the front and rear audio source.
Displaying the Zone Control
screen
Zone Control screen (when the Zone function is On)
Z o n e C o n t r o l
1 Returns to the Control screen of the previous
source.
2 Calls the Setup Menu. (see page 57)
3 Calls the Sound Effects Menu.
4 Turns the Zone Function (that sets different source
sounds for front and rear speakers) On or Off.
When turned On,
and are shown.
5 Sets the front and rear audio source separately.
(This button appears when the Zone function is On.)
When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
However, if you have set the "Area" to "Reverse",
the audio source that is output at the AV OUTPUT
terminal is switched depending on the front sound
source.
6 Switches the front and rear audio sources.
(This button appears when the Zone function is On.)
Use "Reverse" to change over the front and rear
audio sources.
If the zone function is turned on, the /
button appears on each source control screen, with
which you can adjust the volume balance between
the front and rear sources.
R F
R F
M e n u D u a l Z o n e
R e a r F r o n t
D V D
Z o n e
A r e a
Z o n e C o n t r o l
TUNER
R e v e r s e
F R
Set Up
SRC
Audio
1
4
5 5
6
3
2
1 3 : 5 0 DVD V I DEO
REP P B C SCRL TIME
Set Up
Audio
Direct
SRC
T i t l e 1 C h a p 3 T 0 : 0 5 : 2 0
K E N W O O D
T - R E P
F R
DDX7015/7045_K(En)v3.9 04.4.18 9:43 AM ページ90