Kuhn Rikon 3000 SERIES 3030 - Manual (Page 21)

21
3000STOPR005810R082503
KUHN KNIGHT INC.
1501 West 7th Ave. Brodhead, WI 53520-0167
701 Cherry Ave. Greeley, Co. 80632
UNLOADING
After the ration has been thoroughly mixed, open the mixer door to begin unloading. The discharge door opening
determines the flow of feed from the mixer. The door must be opened far enough to prevent separation of materials.
To stop the flow of feed, close the door, then shut off the mixer.
FILL LEVEL
Do not overload mixer! Overloading causes excessive
horsepower requirements, increased strain on mixer
driveline and poor mixer performance.
The design of the Reel Auggie requires that there be
adequate space to allow the feed to move in and around
the Reel chamber. If the Reel is completely covered, it
cannot efficiently mix the materials. The Reel Cross
Tubes should always be visible at the top of their rotation
to allow this mixing space.
Do not exceed full line as shown in diagram.
OPTIONS:
ELECTRIC DOOR CONTROL-
This option allows the discharge door to be operated from a location away from the mixer, or when installation
location requires remote door operation.
ELECTRONIC SCALE -
Allows accurate ration weight while loading, also scale indicator can be located away from mixer if a more conve-
nient location is preferred.
Refer to the manufactures operator manual for your specific scale option operation and maintenance.
HAY MAXX SYSTEM -
A bolt in option designed for the user who wants to add long stem hay more effectively to the ration.
The Hay Maxx handles small and large square bales, broken-up round bales, frozen bunker silage and
other bulky materials without over processing the
Always refer to Operating Safety Precautions and Safety Decal sections of this manual before operating
this mixer.
MIXER OPERATION